37 series 970 powertrip? connectors and accessories receptacle connectors 970-010 low profle jam nut receptacle 970-010 low profile jam nut receptacles 970-010 receptacles have a shorter profle than standard jam nut receptacles. this reduced protrusion behind the mounting panel results from removing the accessory threads, moving the mounting fange and replacing the grommet wire seal with a thinner wire separator. series 970 powertrip? extreme environment receptacle connectors are intended for high current applications where size 8 awg to size 1/0 awg wires are used. contacts snap into connector through rear wire separator and can be removed with a plastic tool. these connectors feature high current louverband contacts. coupling threads are triple-start acme type. emi protected with ground spring and splined backshell interface. standard contacts are silver plated high conductivity copper alloy, or choose gold-plated contacts for improved corrosion protection.contacts are packaged with connector. red stripe indicates full mating condition 970-010 connectors have a low profle wire separator instead of a thick watertight rear grommet. these connectors are splashproof but are not rated for water immersion or altitude immersion. how to order series shell matl and finish shell size - insert arrangement contact type and plating key position 970-010 jam nut receptacle, for rear panel mounting, low profle me aluminum, electroless nickel finish mt aluminum, nickel- ptfe finish nf aluminum, olive drab cadmium zr aluminum, black zinc-nickel finish z1 passivated stainless steel p1 pin contacts, silver plating* p2 pin contacts, gold plating s1 socket contacts, silver plating* s2 socket contacts, gold plating a pin connector, without contacts b socket connector, without contacts * size 12 and 16 contacts are gold-plated. size 8, 4 and 1/0 are silver plated. -1 position 1 -2 position 2 -3 position 3 -4 position 4 -5 position 5 -6 position 6 sample part number 970-010 mt 24-5 p1 -1 contact arr. contact size and qty #16 #12 #8 #4 #1/0 18-2 2 18-4 2 2 20-3 3 20-4 4 20-5 2 3 20-7 4 3 24-2 2 24-3 3 24-5 5 24-6 4 2 24-a6 3 3 28-4 4 28-8 1 7 28-9 5 4 28-15 15 32-2 2 32-3 3 32-4 2 2 32-5 5 32-6 3 3 32-20 1 19 36-4 4 36-16 3 13 40-5 5 40-21 21 www.glenair.com e-mail: sales@glenair.com glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 receptacle connectors b d ? 2013 glenair, inc. series 970 powertrip? cage code 06324 printed in u.s.a.
38 series 970 powertrip? connectors and accessories receptacle connectors 970-010 low profle jam nut receptacle a mating thread b jam nut thread f ? c d e .500 (12.7) max panel thickness red full mate indicator stripe 1.880 (47.75) max 1.410/1.390 (35.81/35.31) .120/.110 (3.05/2.79) dimensions shell size a mating thd. b jam nut thd. ? c d e f in. mm. in. mm. in. mm. in. mm. 18 1.125-.1p-.3l-ts-2a 1.250-18 unef-2a 20 1.250-.1p-.3l-ts-2a 1.4375-18 unef-2a 24 1.500-.1p-.3l-ts-2a 1.625-18 unef-2a 28 1.750-.1p-.3l-ts-2a 1.9375-16 un-2a 32 2.000-.1p-.3l-ts-2a 2.125-16 un-2a 36 2.250-.1p-.3l-ts-2a 2.375-16 un-2a 40 2.500-.1p-.3l-ts-2a 2.625-16 un-2a panel cutout shell size diameter flat in. mm. in. mm. -.000 -.00 -.000 -.00 18 1.265 32.13 1.217 30.91 20 1.452 36.88 1.409 35.79 24 1.640 41.66 1.596 40.54 28 1.952 49.58 1.910 48.51 32 2.140 54.36 2.092 53.14 36 2.390 60.71 2.342 59.49 40 2.640 67.06 2.557 64.95 flat recommended panel cutout diameter key positions position a b c d 1 80 142 196 293 2 135 170 200 310 3 49 169 200 244 4 66 140 200 257 5 62 145 180 280 6 79 153 197 272 a b c d master keyway 970-010 low profile jam nut receptacle r 111214 www.glenair.com e-mail: sales@glenair.com glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 receptacle connectors d ? 2013 glenair, inc. series 970 powertrip? cage code 06324 printed in u.s.a.
|
